Safety Harbor, FL

Completed the visit at this customer. Upon inspection found a very weak capacitor. Replaced the cap and left the system working in good order.

Completed System maintenance. Checked all electrical and mechanical components. Cleaned the drain line. Turn the heater on to make sure everything is ready for the winter time. Left the system working in good order.

Completed the maintenance visit. Clean drain line and checked all components. Unit is working in good work order.

Upon arrival found small leak on the evaporator coil. I was able to fix the leak with aluminum braze. Leak checked the system after the repair, evacuated the system and added new refrigerant. Lefty the systems working in good order.

I’ve completed a thorough inspection of the system, cleaned the drain line, and ensured that the system is functioning optimally.

I’ve completed a thorough inspection of the system, cleaned the drain line, and ensured that the system is functioning optimally.

Completed the service visit for one of our GoodWind family members. Checked all system , cleaned drain line and left the system working in good order.

Completed the maintenance. During the inspection checked the heater, also found the blower capacitor dry weak. Cleaned drain line, replaced capacitor and left the system working in good order.

Upon arrival found the system with clogged drain line. Cleaned and flushed. Also cleaned the primary drain pan which was full of build out. Left the system working in good order.

Completed a service call to a new customer. Found the line was clogged. Flushed with drain solve. Left the system working in good working order. Customer join the family signing up for the service plans.

Completed the service maintenance for one of our members. Cleaned drain line that was very dirty. Check Freon and all electrical items like capacitor, contactor. Checked also amps at the indoor and outdoor fans. Coils are clean. Left the system working I. Good order.

Completed the visit. Clean drain line and tested the heat for winter season. Left the system working in good order.

Completed the maintenance visit. Inspected all mechanical and electrical components. Cleaned drain line that was dirty. During the inspection found the uv light bulbs where broken. I recommend to the Clint to replace them both and she agreed to it. I order the parts and will be back on Thursday to replace them. Lefty the system working good on both mode heat and cool.

A comprehensive inspection and maintenance service was performed on the HVAC system. The visit began with a meticulous examination of the entire system to identify any potential issues. The drain line was cleaned to ensure proper drainage and prevent clogs. Each component was inspected for wear and tear, and necessary adjustments were made to optimize performance. The system was tested to confirm it was operating correctly and efficiently. The job concluded with a detailed explanation of the maintenance performed and advice on future care to ensure continued optimal performance.

I performed a comprehensive tune-up on a minisplit system, ensuring optimal performance. This included a thorough cleaning of the drain line to prevent clogs and ensure efficient drainage. I also cleaned the air filters to enhance air quality and improve system efficiency. All mechanical and electrical components were meticulously checked for proper operation and safety. Although the minisplit requires a deep cleaning, the customer has decided to postpone this task and will notify me when they are ready. The system is now functioning correctly and efficiently.

Upon arrival completed the maintenance visit on the system for one of our members. Cleaned drain line checked all electrical and mechanical components. Blower still working all the time. Customer will let me know when they are ready to replaced it. Left the system working.

Upon arrival found that condenser dual capacitor was completely dead. Replaced the capacitor checked amps on a compressor and a condenser fan to make sure they were working properly after a damage capacitor. At the moment of inspection everything looks like is running good. Lefty the system cooling down and customer happy.

I inspected a Bryant split air conditioning system where the indoor air felt unusually muggy. The indoor evaporator coil was heavily fouled with debris, restricting airflow and preventing effective humidity removal. I conducted a thorough chemical cleaning of the coil, meticulously removing all accumulated debris. Additionally, I replaced the clogged air filter to ensure optimal airflow. After adjusting the blower CFM, I monitored the system's performance. Within two hours, the indoor humidity level decreased by 15%, significantly improving the air quality and comfort in the residence.

Stopped by a residence in Dunedin to address a customer's concern about a burning dust odor coming through the vents when testing their system's heat mode for the first time this fall. We inspected the electric heating element assembly on a Trane heat pump, blew out accumulated dust from the cabinet, and checked all line-voltage wire connections for proper torque. The odor dissipated quickly, and the unit cycled safely on heat mode.

Responded to a service call in Safety Harbor where an older central heat pump was making a loud buzzing noise from the outdoor compressor during morning heating startup. We diagnosed a worn start capacitor and hard start kit on an Amana heat pump system. We replaced both components with heavy-duty OEM parts, lowering compressor startup amp draw and allowing the unit to kick on smoothly and quietly without electrical strain.

Traveled to Palm Harbor to perform fall maintenance on a heat pump where the homeowner reported intermittent lukewarm air delivery. We checked system operating pressures, tested thermistor readings, and found the system slightly low on refrigerant due to a minor valve stem leak. We repaired the valve fitting, evacuated the lines, and recharged R-410A refrigerant to exact factory specifications, restoring precise temperature control in both heating and cooling modes.

Called out to a beachside residence in Indian Rocks Beach where salt air corrosion had pitted the outdoor contactor points on a Lennox heat pump, preventing the fan from turning on during humid fall afternoons. We replaced the corroded contactor with a sealed marine-grade unit, cleaned the terminal posts, and applied protective anti-corrosion coating. The outdoor fan engaged instantly, dropping indoor room temperatures to setpoint.

I installed a Mitsubishi Ductless Mini-Split system to address uneven heating and cooling in a newly added sunroom. The high-efficiency wall unit was mounted in the sunroom, and an outdoor inverter condenser was connected. I meticulously leak-tested the line set, pulled a deep vacuum, and ensured independent, rapid heating and cooling control. This setup provided the sunroom with comfortable temperatures, effectively resolving the issue during breezy fall days.

Dispatched to a home in Belleair for an autumn heat pump tune-up where the customer wanted to make sure their heating mode was fully operational before the first mild cold front arrives this fall. We inspected the heat pump system, cleaned the outdoor coils to remove salt spray buildup, and tested the emergency auxiliary heat strips on a Carrier system. We confirmed that the reversing valve shifted smoothly and verified a steady 110-degree heat output at all supply registers.

Evaluated a system in Pinellas Park where a customer's thermostat went completely blank after an autumn rainstorm moved through the area. We tested the low-voltage control circuit on an American Standard system and found a blown 3-amp fuse caused by a shorted wire near the outdoor unit casing. We repaired the damaged wire insulation, replaced the fuse, and installed a low-voltage surge protector to guard the electronic controls against future voltage spikes.