St. Petersburg, FL

I’ve completed a thorough inspection of the system, cleaned the drain line, and ensured that the system is functioning optimally.

I’ve completed a thorough inspection of the system, cleaned the drain line, and ensured that the system is functioning optimally.

Upon arrival found the system with clogged drain line. Cleaned and flushed. Also cleaned the primary drain pan which was full of build out. Left the system working in good order.

Completed a service call to a new customer. Found the line was clogged. Flushed with drain solve. Left the system working in good working order. Customer join the family signing up for the service plans.

Completed the service maintenance for one of our members. Cleaned drain line that was very dirty. Check Freon and all electrical items like capacitor, contactor. Checked also amps at the indoor and outdoor fans. Coils are clean. Left the system working I. Good order.

I performed a comprehensive tune-up on a minisplit system, ensuring optimal performance. This included a thorough cleaning of the drain line to prevent clogs and ensure efficient drainage. I also cleaned the air filters to enhance air quality and improve system efficiency. All mechanical and electrical components were meticulously checked for proper operation and safety. Although the minisplit requires a deep cleaning, the customer has decided to postpone this task and will notify me when they are ready. The system is now functioning correctly and efficiently.

Upon arrival found that condenser dual capacitor was completely dead. Replaced the capacitor checked amps on a compressor and a condenser fan to make sure they were working properly after a damage capacitor. At the moment of inspection everything looks like is running good. Lefty the system cooling down and customer happy.

I addressed moisture issues in a home with a Trane heat pump system, focusing on the crawlspace and main air ducts. High seasonal tides and coastal humidity had led to moisture buildup. I inspected the duct network, identified a torn insulation jacket on the main trunk line, and repaired it. Additionally, I re-sealed all connections using foil-backed mastic tape. These repairs effectively prevented warm, moist crawlspace air from entering the system, ensuring the supply air remained clean and dry. The work improved indoor air quality and system efficiency.

Completed a duct repair on a sheet metal duct system.

Completed the Maintenance visit to this customer home. Clean drain line and check the system Freon due the last visit the system was low. This time the system do not need Freon. Left the system working in good order.